Skip to Content
Book a test drive

Technology & Digitalisation

View of the cockpit of the Q5 SUV e-hybrid. Among other things, you can see the panoramic display and the MMI passenger display, as well as the interaction light at the bottom of the windshield.
Book a test drive

Energy for every day
20.7

kWh*

Battery capacity (net)

Ready to go in approx.
150

min*

Charged capacity from 0% to 100%

Powerful propulsion from the electric motor
105

kW

Peak electric output*

Dynamic and efficient.

Enjoy long distances and outstanding dynamism with quattro all-wheel drive and the combined power of electric motor and TFSI engine with two output ratings of up to 220 kW* and 270 kW*. And thanks to recuperation, energy is fed back into the battery when braking.

Close-up of the MMI display in the cockpit of the Q5 SUV e-hybrid. The screen shows the vehicle's charging status and available reserve.
Carefree – travel and commute electrically.

On the MMI, choose between the all-electric EV driving mode and the hybrid mode, comprising the electric motor and internal combustion engine. In the hybrid mode, a slider can also be used to set the required target battery charge status*, if activated in good time.

Every journey becomes a digital performance.

Digital stage in the interior: the curved OLED panoramic display combines the Audi virtual cockpit plus with the MMI touch display.

View from the back seat into the cockpit of the Q5 SUV e-hybrid. A woman is sitting at the wheel and driving along a mountain road. The Audi virtual cockpit plus can be seen behind the steering wheel.

Your cockpit, your displays.

You have everything in view in the display of the Audi virtual cockpit plus. Whether instrument view, important information from the assist systems* or the navigation map – choose what you want to see, clear and easy to read at a glance.

Note: The image is from the Audi Q5 Sportback e-hybrid*.

Close-up of the MMI touch display.

Become interactive.

Simply write addresses or search terms directly on the screen using your finger – the MMI touch display makes operation as easy as possible. And free zooming in maps makes navigation effortless.

Note: The image is from the Audi Q5 SUV*.

Digital OLED technology with tail light signatures, dynamic flashing light, and light strip.

New possibilities for the front passenger.

Here you can play, stream and discover: The MMI front passenger display*, *, * brings entertainment and apps*, * to the front passenger seat – and, thanks to privacy mode, makes sure you are not distracted at the wheel. Incidentally, it also handles navigation.

Note: The image is from the Audi Q5 Sportback e-hybrid*.

Lighting the way forward.

Your Audi Q5 shows you the way in style – by day and by night. And always puts you in the best light.

Discover Audi range

The Q5 Sportback e-hybrid is shown in side profile in front of a modern house. The vehicle is connected to a charging station mounted on the wall of the house.

Q5 Sportback e-hybrid

The Q5 SUV is parked in a parking lot right on the coast. Next to it is a futuristic house.

Q5 SUV

Angled, side rear view of the SQ5 SUV in dark blue, driving along a coastal road.

SQ5 SUV

Back to top

© 2026 Unicars Ltd. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp
We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).

Loading..