Skip to Content
Book a test drive

Design & Specifications

The A6 Avant e-hybrid is parked in a parking bay in front of a building.
Book a test drive

A statement on the outside. An experience on the inside.

Balanced proportions with a minimalist design on the outside. Comfort with an innovative cockpit concept on the inside.

Compare Technology packages*.

Tech*

The package for light and comfort. Clear visibility with the matrix LED headlights and your comfort temperature thanks to 4-zone deluxe automatic air conditioning.

Tech plus*

New and familiar technical highlights for more driving pleasure, safety and comfort. The MMI front passenger display* brings entertainment to the front passenger seat.

Tech pro*

Audi technologies that leave virtually nothing to be desired. The top equipment features include 360° surround view cameras* and park assist pro*, *, *.

The A6 Avant stands in front of a modern house, viewed from an angle. There is a roof box with the Audi logo on the roof. A man stands to the left of the vehicle.

Audi Genuine Accessories*.

Audi Genuine Accessories* turn your vehicle into an absolute all-round talent. Practical equipment and visual accents allow you to easily adjust it to new needs. Again and again.

Note: The image is from the Audi A6 Avant*.

View of the displays and steering wheel in the cockpit of the A6 Avant e-hybrid. Mountains can be seen through the windshield.

Learn more about Technology and Digitalisation.

Discover Technology & Digitalisation
Back to top

© 2026 Unicars Ltd. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp
We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).

Loading..