Skip to Content

Change lanes with ease with adaptive cruise assist plus.

Adaptive cruise assist plus is helpful, especially in heavy traffic on the motorway, for performing assisted lane changes. When you activate the indicator, your Audi steers you into the other lane. The system aborts the manoeuvre automatically if another vehicle is blocking the lane, if a faster vehicle is approaching from behind or if a solid line is detected. You can intervene at any time by countersteeirng or by indicating in the opposite direction.

This might interest you.

  • Close-up of a display in the vehicle interior. Various setting options are shown under the ‘Warnings’ menu, including ‘Lane departure warning’ and ‘Distance warning’.

    Adjusting assist systems and checking warnings.

  • Close-up of a display in the vehicle interior. The silhouette of a vehicle travelling straight ahead is shown. Below this, the current speed and remaining range are displayed, among other things.

    Adjust the speed warning of the camera-based traffic sign recognition.

  • Close-up of a display in the vehicle interior. Various setting options are shown under the ‘Speed’ menu, including ‘Control based on speed limits’ and ‘Control based on right of way’.

    Using adaptive cruise control with distance control.

  • Close-up of a display in the vehicle interior. The silhouette of a vehicle travelling straight ahead is shown. Below this, the current speed and remaining range are displayed, among other things.

    Setting the predictive speed limiter.

  • Close-up of a display in the vehicle interior. A message stating ‘Fatigue warning: Please take a break!’ is prominently displayed.

    Learn how the driver attention and fatigue monitor works.

  • Close-up of a display in the vehicle interior. The silhouette of a vehicle travelling straight ahead is shown. Below this, the current speed and remaining range are displayed, among other things.

    Understanding the lane departure warning and how it works.

  • Close-up of a display in the vehicle interior. A parking situation is shown from two perspectives: from above the vehicle and from the rear camera.

    Park in and out with ease with park assist plus.

Back to top

© 2026 Unicars Ltd. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp
We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).

Loading..