Clean performance.

Interior filters from Audi Genuine Parts reduce the ingress of pollen and particulates into your vehicle's interior via the ventilation system¹. To ensure that the interior filter always functions properly, the filter should be replaced regularly.

 

Dust and pollen filters

 

  • Reduces the ingress of dust, pollen and aerosols into the vehicle interior

 

 

Dust and pollen filters with an activated charcoal layer (+)

 

  • Reduces the ingress of dust, pollen and aerosols into the vehicle interior
  • A pre-filter, which traps larger dust and soot particles
  • An activated charcoal layer, which binds gaseous substances, ozone and unpleasant odours
  • A top layer, which protects the activated charcoal layer from damage

 

 

Dust and pollen filters with an activated charcoal layer and particulates filter (++)

 

  • Reduces the ingress of dust, pollen and aerosols into the vehicle interior
  • A pre-filter, which traps larger dust and soot particles
  • An activated charcoal layer, which binds gaseous substances, ozone and unpleasant odours
  • A top layer, which protects the activated charcoal layer from damage
  • A particulate layer, which traps inorganic dust (e.g. sand dust) and organic dust (e.g. leaf and crop residue)

 

 

Odour and anti-allergen filters (+++)

 

  • Reduces the ingress of dust, pollen and aerosols into the vehicle interior
  • A filtration layer, in which special microfibres collect pollen and fine particulates from the air
  • The activated charcoal layer binds unpleasant odours and harmful gases such as ozone, sulphur oxide and nitrogen oxide
  • A top layer, which protects the activated charcoal layer from damage
  • An anti-allergen layer, which contains a natural active substance (plant-based, bio-active), filters 99% of all pollen, and inhibits the growth of bacteria and moulds
  • Fitted at the factory in an increasing number of models and can be retrofitted to many models

 

 

¹ Contact your Audi partner for information about the availability of the various filter types for your vehicle.

Back to top

© 2023 Unicars Ltd. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.




We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).