Powerful and self-confident.<br/>The Audi SQ2.

In the new top model of the Q2 family you will experience the passionate power of an Audi S model, the advantages of a modern compact SUV as well as top-class safety and infotainment equipment. This is the Audi SQ2.

See and be seen

With the LED headlights available as standard in the Audi SQ2, you can illuminate your surroundings precisely and brightly like daylight. The combination rear lamps, including dynamic indicator lights, are also equipped with LED technology and allow you to perceive other road users more quickly.

Better safe than sorry

So that you can concentrate exclusively on road traffic, the Audi SQ2 takes the strain off you with intelligent driver assistance systems. Four examples: Audi pre sense front protects you from critical situations with other vehicles or pedestrians crossing and, if necessary, initiates emergency braking. The lane change assistant Audi side assist uses a warning LED to indicate if you are overlooking a vehicle in the blind spot. The lane departure warning system, Audi active lane assist, keeps you in lane from 65 km/h (40 mph) by subtly intervening in the steering. It even notices line markings in road works. Thanks to the parking assistant with environment display and rear view camera, you can easily park in any gap.

Back to top

© 2025 Unicars Ltd. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.




We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).