S3 Sedan

The new Audi S3 Sedan.

Fuel consumption combined: 7.3–7.2 l/100 km CO₂ emissions combined: 166–165 g/km Stronger. Sportier. Immediately fascinating: the new Audi S3 Sedan*. It combines dynamic driving performance with elegant, coupé-like design and offers countless technical highlights that make everyday life easier. Progress you can feel.

Dial S for fun at the wheel

The new Audi S3 Sedan* is equipped for quick manoeuvres thanks to the outstanding traction provided by the standard quattro all-wheel drive along with increased driving dynamics and sportier handling courtesy of S sport suspension. The S tronic dual-clutch transmission is also standard and combines the convenience of automatic transmission with the sportiness of a manual gearbox.

Sportiness in numbers

Output
228

kW**

(310 hp)

Acceleration
4.8

s**

0 to 100 km/h

Torque
400

Nm**

Maximum

**Fuel consumption combined¹: 7.3–7.2 l/100 km; CO₂ emissions combined¹: 166–165 g/km.

Total front view Audi S3 Sedan

Drive and engine

The 228 kW TFSI engine (Fuel consumption combined: 7.3–7.2 l/100 km; CO₂ emissions combined: 166–165 g/km) in the new Audi S3 Sedan* confidently accelerates the vehicle to its top speed of 250 km/h. 400 Nm of torque makes for breathtaking driving dynamics and will accelerate you from 0 to 100 km/h in only 4.8 seconds.

Rear spoiler Audi S3 Sedan

Exterior: The elegant way to flex your muscles

The precise design, elegant rear and S-specific elements of the Audi S3 Sedan* underscore its sportiness: for example the dual-branch exhaust system with twin tailpipe trims on each side, the expressive optional 19-inch alloy wheels, and the vehicle’s powerful shoulders, sill trims and dynamic rear spoiler.

Panorama view

Experience the Audi S3 Sedan from different angles in this 360-degree animation.

Sporty genes inside and out

The clarity and dynamism of the new Audi S3 Sedan* is carried over into the interior. S-specific elements such as the front sport seats with rhombus pattern, which offer outstanding lateral support, and the optional flattened sport contour leather steering wheel in 3-spoke design with multifunction plus turn the car into a real athlete. High-quality details such as the illuminated aluminium door sill trim with S logo lend further emphasis.

The clarity and dynamism of the new Audi S3 Sedan* is carried over into the interior. S-specific elements such as the front sport seats with rhombus pattern, which offer outstanding lateral support, and the optional flattened sport contour leather steering wheel in 3-spoke design with multifunction plus turn the car into a real athlete. High-quality details such as the illuminated aluminium door sill trim with S logo lend further emphasis.

MMI system and Audi virtual cockpit of the Audi S3 Sedan

Always keep your eye on your goals

The optional MMI navigation plus with MMI touch in combination with the optional Audi virtual cockpit plus provides you with a clear overview of all vehicle information and maps. And the optional head-up display projects additional information onto the windscreen. Entertainment is also provided: The full-bodied engine isn’t the only source of impressive sound, the same goes for the Bang & Olufsen 3D Premium Sound System.

*    Fuel consumption combined¹: 7.3–7.2 l/100 km; CO₂ emissions combined¹: 166–165 g/km.

Back to top

© 2025 Unicars Ltd. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.




We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).

Loading..